Corrected Calcium Calculator

Corrected Calcium Calculator / Examples

Calcium 9.0 With Albumin 2.0

Worked example of the corrected calcium formula. Change the numbers to check your own result.

Calcium unit
mg/dL
Albumin unit
g/dL
4.0 g/dL (40 g/L) is standard. Some labs use their own mean.
g/dL
Albumin factor

Your result

Enter the values and press the button. The result appears here.

Step by step

StepWorkingResult
1. Albumin deficit4.0 − 2.02.0 g/dL
2. Multiply by 0.80.8 × 2.01.60 mg/dL
3. Add to calcium9.0 + 1.6010.60 mg/dL
4. Convert10.60 × 0.24952.64 mmol/L

What 10.6 mg/dL corrected means

The measured calcium of 9.0 mg/dL is within the usual adult range; after correction it is mildly high. The albumin correction moves this result into a different band, which is exactly the situation where checking a measured ionized calcium is worthwhile.

A corrected calcium above 10.2 and below 12 mg/dL is in the range StatPearls describes as mild hypercalcemia. Many people at this level have no symptoms and the finding comes from a routine panel. The usual first step is to repeat the test, ideally with an ionized calcium, and then check parathyroid hormone (PTH).

More than 90% of hypercalcemia is due to primary hyperparathyroidism or cancer, according to StatPearls; mild, long-standing values point toward hyperparathyroidism. Thiazide diuretics, lithium, vitamin D excess and familial hypocalciuric hypercalcemia are other causes.

About the albumin of 2.0 g/dL

An albumin of 2.0 to 2.9 g/dL (20 to 29 g/L) is clearly low. Common causes are acute or chronic illness with inflammation, liver disease, kidney protein loss and poor nutrition. The correction adds a large amount to calcium here, and studies show it often disagrees with ionized calcium once albumin is below about 3.0 g/dL, so treat the corrected value as an estimate.

With Payne's original factor of 1.0 the corrected value would be 11.0 mg/dL, 0.4 mg/dL higher.

How sensitive the answer is to albumin

Albumin (g/dL)Corrected (mg/dL)Reads as
1.610.9High (mild)
1.810.8High (mild)
2.0 (this example)10.6High (mild)
2.210.4High (mild)
2.410.3High (mild)

Albumin results have their own measurement error, and different albumin methods disagree by a few g/L, so small differences near a cut-off should not be over-read.

Same calculation in SI units

Calcium 2.25 mmol/L + 0.02 × (40 − 20 g/L) = 2.65 mmol/L.

Common questions

What is the corrected calcium for calcium 9.0 and albumin 2.0?

10.6 mg/dL (2.64 mmol/L) with the standard formula, high (mild).

Should ionized calcium be measured here?

Yes, if the result will change treatment: albumin is 2.0 g/dL, where the correction is unreliable.

Sources

  1. Payne RB, Little AJ, Williams RB, Milner JR. Interpretation of serum calcium in patients with abnormal serum proteins. Br Med J. 1973;4(5893):643–646.
  2. Malignancy-Related Hypercalcemia. StatPearls [Internet]. Treasure Island (FL): StatPearls Publishing; NCBI Bookshelf NBK482423 (mild 10–12, moderate 12–14, severe over 14 mg/dL).
  3. MedlinePlus Medical Encyclopedia. Calcium blood test (article 003477). US National Library of Medicine.
  4. MedlinePlus Medical Encyclopedia. Albumin blood (serum) test. US National Library of Medicine.
  5. Hypocalcemia. StatPearls [Internet]. Treasure Island (FL): StatPearls Publishing; NCBI Bookshelf.

For information only. These tools do not diagnose any condition and do not replace a doctor or your laboratory's own reference ranges. Last reviewed November 2026.